Good questions.
Clear answers.

HOCl is a molecule involved in the body’s immune response. It can also be produced through electrolysis of purified salt and water for use in disinfecting solutions. Product concentration, application, and contact time matter; follow the applicable label.

Danolyte identifies its Disinfectant as EPA-registered and included on EPA List N. Use it on label-approved hard, nonporous surfaces according to the applicable directions and contact times. Read the manufacturer’s product label ↗

Danolyte says its disinfectant contains no added fragrance. A slight chlorine smell may be noticeable on application and dissipates after dispensing.

HOCl acts on microorganisms, damaging cellular structures and disrupting their ability to function. Danolyte produces its solution by electrolyzing saltwater in an electrochemical cell.

A hospital disinfectant must meet the applicable EPA efficacy requirements. Danolyte’s source information discusses testing against organisms including Staphylococcus aureus and Pseudomonas aeruginosa. Always consult the registered label for the actual organisms and uses covered.

Use the specific product only as directed on its label, including precautions, storage, and application instructions. Keep products out of children’s reach. A surface-disinfectant label should not be taken as approval for use on skin, wounds, or animals.

Danolyte describes applications in homes, offices, schools, daycares, healthcare facilities, and food-preparation areas. Check the product label for approved surfaces and instructions in each setting.

HOCl and bleach-based products differ in formulation, concentration, and pH. Compare registered uses, contact times, compatibility, and handling instructions for the specific products—not a universal effectiveness multiplier.

Danolyte discusses spray, deodorizing, misting, and fogging applications. Only use a method expressly allowed by the specific product label; ask the manufacturer to confirm equipment and application requirements.

Danolyte’s approach combines HOCl chemistry with ready-to-use formats and on-site generation. For Disinfectant, efficacy and food-contact applications depend on its registered label and directions.

Danolyte Fruit + Veggie Wash is a product designed to clean fresh produce. Its formula is specifically created to naturally remove harmful contaminants such as pesticides, soil, chemical residues, and surface containments from fruits and vegetables. The core philosophy behind the product is "Naturally Clean," which extends beyond just removing visible dirt to also safeguarding health and enhancing environmental purity.

The wash is designed to help loosen and lift surface dirt and residues from fruits and vegetables. Follow its package directions for application and rinsing.

Beyond just cleaning, the wash offers several benefits. It helps to prolong the freshness of produce, naturally cleans without harsh chemicals, removes various surface contaminants, preserves natural flavors, and is presented as an environmentally friendly option.

Danolyte promotes a simple, naturally derived formulation. Its FAQ does not specify the complete ingredient names; check the current product label or ask the team for the full ingredient information.

Danolyte markets the wash for a range of conventional and organic produce, from berries to root vegetables. Follow the product directions for the particular produce you are washing.

Danolyte describes its formula as biodegradable and its packaging as recyclable. Check your local recycling guidance for the specific container.

Follow the current bottle directions for application, contact time, and rinsing. Contact Danolyte if your label does not answer your question.

HydroxyClean is an alkaline cleaning solution produced using salt, water, and electricity. It is designed for cleaning and degreasing—not as a substitute for a registered disinfectant.

Almost everything! It removes oil, grease, soap scum, rust, food residue, mildew, dirt, grime, and even baked-on carbon. Use it on kitchen surfaces, bathrooms, floors, outdoor areas, grills, jewelry, glass, carpets, and more. One product replaces multiple specialty cleaners.

Its alkaline chemistry helps break down fats and oils and lift grime from surfaces. Surface condition and the type of soil affect how much dwell time and wiping are needed.

Follow the HydroxyClean label for use, storage, and precautions. Keep cleaning products out of children’s reach and avoid assuming that a simple ingredient list makes every application appropriate.

HydroxyClean is supplied ready to use. Follow its label: spray on a compatible surface and wipe clean. Do not mix it with other cleaning products.

For best results, use within 26 weeks of production. The electrical activation naturally fades over time, so fresher is better. Store away from direct sunlight in a cool place.

Danolyte describes HydroxyClean as a low-residue cleaner without the films associated with some conventional cleaners. Wipe away the loosened soil and follow the label directions.

HydroxyClean is safe for most surfaces including granite, stainless steel, glass, ceramic, hardwood, and fabric. Always test on a small, hidden area first, especially on delicate surfaces.

Danolyte positions HydroxyClean as a multipurpose option that can reduce the number of specialty cleaners you buy. Actual cost depends on product size, usage, and the products it replaces.

Danolyte recommends it for stubborn grease, carbon buildup, and baked-on food. Allow time to work before wiping; follow label directions and test the surface first.

No harsh chemical odors! HydroxyClean has a very mild scent and actually helps neutralize other odors rather than masking them with strong fragrances.

Simply spray HydroxyClean directly onto any dirty surface, let it work for 30 seconds to 2 minutes (longer for tough stains), then wipe clean with a cloth or paper towel. No special equipment or training needed!

The Danolyte generator employs advanced electrolytic technology to produce high-quality HOCl using only salt and water. It maintains a consistent pH and high activation energy for maximum effectiveness.

Costs depend on daily production, utilities, salt, maintenance, equipment, and support. Ask Danolyte for a comparison based on your facility’s demand.

pH affects the balance between hypochlorous acid and hypochlorite in solution. Danolyte lists a pH range of 6.5–7.0 on its generator specifications page; confirm the current configuration and output requirements.

Contact Danolyte with your company name, contact details, application, and expected production demand. Talk to the team or compare the generator specifications.

Explore the product collection, generator specifications, and on-site production overview. The team can help with application-specific questions.

Danolyte’s FAQ mentions support from experts across different fields but does not identify generator-specific endorsements there. Ask the team for relevant references for your application.